more | Kavan 26x11mm Pin Hinge (10 Pieces) (0129)
All of these metal pinned hinges feature retaining holes to give good adhesive penetration through the hinge. These hinges can be installed quickly and simply using either CA or two part epoxy.
| |
more | Kavan 34x16mm Pin Hinge (10 Pieces) (0073/1)
All of these metal pinned hinges feature retaining holes to give good adhesive penetration through the hinge. These hinges can be installed quickly and simply using either CA or two part epoxy.
| |
more | Kavan 39x20mm Pin Hinge (10 Pieces) (0073/4)
All of these metal pinned hinges feature retaining holes to give good adhesive penetration through the hinge. These hinges can be installed quickly and simply using either CA or two part epoxy.
| |
more | Radio Active Nylon Mini Hinges Packet of 10 (RCA143)
All of these metal pinned hinges feature retaining holes to give good adhesive penetration through the hinge. These hinges can be installed quickly and simply using either CA or two part epoxy.
| |
more | Slec Mylar Hinge For Cyano (SL163)
| |
more | Radio Active 8" Pushrod M2 Threaded Pack Of 10 (RCA127)
| |
more | Radio Active Threaded Metal Rod 2mm 12" (Pk10) (RCA127/12)
| |
more | Radio Active Metal Link & Extender (RCA122)
| |
more | Radio Active Metal Snap Link M2 (Pk2) (RCA124)
| |
more | Radio Active Mini Snap Links (Pk4) (RCA102)
| |
more | Radio Active Nipple Links M2 (Pk2) (RCA107)
| |
more | Radio Active Metal Extenders M2 (Pk 4) (RCA123)
| |
more | Radio Active Ball Links M2 (pk 2) (RCA137)
| |
more | Radio Active Ball Link Connector (Pk 2) (RCA104)
| |
more | Radio Active Threaded Rod M3 200mm (pk5) (RCA127/M3)
| |
more | Radio Active M3 Metal Link (Pk2) (RCA124/M3)
| |
more | Radio Active M3 Extender (Pk2) (RCA123/M3)
| |
more | Radio Active M3 Ball Joint & M2 Ball (Pk2) (RCA137/M3)
| |
more | Du-Bro Aileron Connector (Dual Take Off) (183)
| |
more | Radio Active Strip Aileron Horn Set 12SWG (RCA134)
| |
more | Du-Bro Control Over-Ride Servo Saver (120)
| |
more | Du-Bro Strip Aileron Horn Set (103)
| |
more | Radio Active Control Horn Small (Pk2) (RCA108)
| |
more | Radio Active Control Horn Large (Pk2) (RCA109)
| |
more | Radio Active Bellcrank 90 Degree (Pk2) (RCA110)
| |
more | Ripmax 2mm Pushrod Connector Pack 2 (RMX300)
| |
more | Slec Brass Push Rod Connector (Pk2) (SL063)
| |
more | Perkins Mini Quick Keepers (5508025)
| |
more | Du-Bro Large Scale Control Horns (366)
| |
more | Du-Bro Closed Loop System (Pull-Pull) (517)
more.. | |
more | Ripmax Closed Loop System (FMG194)
| |
more | Radio Active M2 Closed loop Adaptor Brass Pack Of 4 (FRCA270)
| |
more | Radio Active M3 Closed loop Adaptor Brass Pack Of 4 (FRCA272)
| |
more | Radio Active Bowden Cable & Links 1.0 metre (RCA114)
| |
more | Sullivan Gold-N-Rod 36" Semi Flexible (505)
| |
more | Sullivan Gold-N-Rod 36" Flexible (503)
| |
more | Du-Bro Lazer Rods 36" Snake (2) (500)
| |
more | Slec Yellow 1Mtr Snake Fitting (SL026)
| |
more | Slec Engine Mount And Screws .049 (SL06D)
| |
more | Radio Active Engine Mount 19-30 (RAA1077)
Designed for screw mounting to a bulkhead, each mount has grooves to trap a fixed noseleg behind it – no matter which way up you mount the engine. Supplied with four self-tapping screws, each mount is moulded from tough glass filled nylon and is available in a variety of sizes to suit the engine you wish to mount. Three mounts with extra long beams are available which are suitable for both two and four stroke engines.
| |
more | Radio Active Engine Mount 30-45 (RAA1078)
Designed for screw mounting to a bulkhead, each mount has grooves to trap a fixed noseleg behind it – no matter which way up you mount the engine. Supplied with four self-tapping screws, each mount is moulded from tough glass filled nylon and is available in a variety of sizes to suit the engine you wish to mount. Three mounts with extra long beams are available which are suitable for both two and four stroke engines.
| |
more | Ripmax Adjustable Engine Mount (for 40-70 size) (RMX251)
| |
more | Radio Active Engine Mount 30-45 Long (LRAA1505)
Designed for screw mounting to a bulkhead, each mount has grooves to trap a fixed noseleg behind it – no matter which way up you mount the engine. Supplied with four self-tapping screws, each mount is moulded from tough glass filled nylon and is available in a variety of sizes to suit the engine you wish to mount. Three mounts with extra long beams are available which are suitable for both two and four stroke engines. | |
more | Radio Active Engine Mount 45-61 Long (LRAA1510)
Designed for screw mounting to a bulkhead, each mount has grooves to trap a fixed noseleg behind it – no matter which way up you mount the engine. Supplied with four self-tapping screws, each mount is moulded from tough glass filled nylon and is available in a variety of sizes to suit the engine you wish to mount. Three mounts with extra long beams are available which are suitable for both two and four stroke engines. | |
more | Radio Active Engine Mount 60-90 Long (LRAA1515)
Designed for screw mounting to a bulkhead, each mount has grooves to trap a fixed noseleg behind it – no matter which way up you mount the engine. Supplied with four self-tapping screws, each mount is moulded from tough glass filled nylon and is available in a variety of sizes to suit the engine you wish to mount. Three mounts with extra long beams are available which are suitable for both two and four stroke engines. | |
more | Ripmax Speed 480 Gear Drive Set 3 (EP483/0PK)
Specially developed for the new Ripmax Alliance, this highly efficient gear drive system includes a powerful 480 motor, ballraced 3:1 gearbox and taper collet prop adapter with domed nut. Of course, it can also be used on other models requiring similar power requirements. | |
more | Ripmax Speed 400 Geared Drive Set 3.66 (EP403/66PK)
Ideal for use with smaller electric gliders and power models, shaft diameter 3.2mm, the set includes, 400 size motor, 3.5:1 gearbox.
| |
more | Perkins Epicyclic Gearbox for Speed 600 Motor (5510333)
| |
more | Du-Bro Fuel Tank 2oz Square (402)
Dubro tanks will not split or crack under vibration or pressure & come with one-piece barbed clunk and fittings. The protruding lower front section of the tank prevents fuel line crimping & an optional petrol-resistant bung allows for running in large petrol-engined models. | |
more | Du-Bro Fuel Tank 4oz Square (404)
Dubro tanks will not split or crack under vibration or pressure & come with one-piece barbed clunk and fittings. The protruding lower front section of the tank prevents fuel line crimping & an optional petrol-resistant bung allows for running in large petrol-engined models. | |
more | Du-Bro Fuel Tank 6oz Square (406)
Dubro tanks will not split or crack under vibration or pressure & come with one-piece barbed clunk and fittings. The protruding lower front section of the tank prevents fuel line crimping & an optional petrol-resistant bung allows for running in large petrol-engined models. | |
more | Du-Bro Fuel Tank 8oz Square (408)
Dubro tanks will not split or crack under vibration or pressure & come with one-piece barbed clunk and fittings. The protruding lower front section of the tank prevents fuel line crimping & an optional petrol-resistant bung allows for running in large petrol-engined models. | |
more | Du-Bro Fuel Tank 10oz Square (410)
Dubro tanks will not split or crack under vibration or pressure & come with one-piece barbed clunk and fittings. The protruding lower front section of the tank prevents fuel line crimping & an optional petrol-resistant bung allows for running in large petrol-engined models. | |
more | Du-Bro Fuel Tank 14oz Square (414)
Dubro tanks will not split or crack under vibration or pressure & come with one-piece barbed clunk and fittings. The protruding lower front section of the tank prevents fuel line crimping & an optional petrol-resistant bung allows for running in large petrol-engined models. | |
more | Du-Bro Fuel Tank 20oz Square (420)
Dubro tanks will not split or crack under vibration or pressure & come with one-piece barbed clunk and fittings. The protruding lower front section of the tank prevents fuel line crimping & an optional petrol-resistant bung allows for running in large petrol-engined models. | |
more | Du-Bro Fuel Tank 24oz Square (424)
Dubro tanks will not split or crack under vibration or pressure & come with one-piece barbed clunk and fittings. The protruding lower front section of the tank prevents fuel line crimping & an optional petrol-resistant bung allows for running in large petrol-engined models. | |
more | Ripmax Fuel Tank 50oz/1500cc (RMX1500)
These high visibility fuel tanks come complete with all the fittings shown. The leak-free stopper and tank itself is also suitable for petrol but you will have to change the silicone fuel tube to PVC or other petrol resistant tubing.
| |
more | Radio Active Wheel Collets 16 swg (Pk4) (RAA1096)
| |
more | Radio Active Wheel Collets 14 swg (Pk4) (RAA1097)
| |
more | Radio Active Wheel Collets 12 swg (Pk4) (RAA1098)
| |
more | Radio Active Wheel Collets 10 SWG (Pk4) (RAA1083)
| |
more | Radio Active Wheel Collets 8 SWG (Pk4) (RAA1084)
| |
more | Radio Active Wheel Collets 6 SWG (Pk4) (RAA1085)
| |
stock
info | Antics EUROKIT UNDERCARRIAGE KIT (CRA/15216/000)
| |
stock
info | Du-Bro Tail Wheel Bracket (Med) (376)
| |
more | Radio Active Small Main U/C Wire 10swg (RAA1093)
| |
more | Robart Mechanical Mains Gear Retracts (15-40 Size) (600)
Constructed of glass-filled nylon, these units have positive up-and-down locks, a smooth, dependable cam operation, and a tempered-steel, 3/32' (2.4mm) wire strut. The 1-oz (28.4 grams) micro retracts can be operated with standard or retract servos. Recommended for up to 5lbs (2268g) model weight. | |
more | Du-Bro .75" Tailwheel (75TW)
| |
more | Du-Bro 1" Tailwheel (100TW)
| |
more | Du-Bro 1.25" Tailwheel (125TW)
| |
more | Perkins Rounded Foam Wheels 51mm (Pk2) (5507036)
| |
more | Perkins Rounded Foam Wheels 57mm (Pk2) (5507039)
| |
more | Perkins Rounded Foam Wheels 64mm (Pk2) (5507041)
| |
more | Perkins Rounded Foam Wheels 70mm (Pk2) (5507043)
| |
more | Perkins Rounded Foam Wheels 76mm (Pk2) (5507045)
| |
more | Du-Bro Low Bounce Wheels 57mm (2.25") Pk2 (225T)
| |
more | Radio Active Airwheel 2.75" 8SWG (Pk2) (RAA1208)
| |
more | Radio Active Airwheel 3.5" 8SWG (Pk2) (RAA1211)
| |
more | Radio Active Alu Hub Airwheel 3" 8SWG (Pk2) (RAA1409)
| |
more | Radio Active Alu Hub Airwheel 3.5" 8SWG (Pk2) (RAA1411)
| |
more | Ripmax External Charge Holder (PR4ECH)
| |
more | Radio Active Servo Mounting Bracket c/w Screws (RCA190)
Radio Active's servo mount bracket converts just about any servo from beam to side wall fixing. Neat, light and very practical. | |
more | Radio Active Wing Servo Mounting Set (Pk2) (RCA210)
Radio Active's servo mount bracket converts just about any servo from beam to side wall fixing. Neat, light and very practical.
| |
more | Perkins Wing Servo Mount Micro (5508013)
| |
stock
info | Ripmax Armaflex Receiver Packing (SP120)
| |
more | Radio Active Armour Guard RX Packing (FRAA1065)
No installation is complete without plenty of foam packing around the receiver and battery. With the tubular packing, simply cut off the length you require and insert your receiver or battery. Couldn't be simpler, or safer.
| |
more | Perkins Armorguard receiver Packaging (5508037)
| |
more | Perkins Receiver Strongbox (7720980)
more.. | |
more | Slec Servo Screws And Washers (SL009)
| |
more | Ripmax Tie Straps 4" Fl. Yellow Pk 20 (IP220FY)
| |
more | Ripmax Hook & Loop 1" x 6 (TIP210B)
| |
more | Ripmax Servo Tape 1.5" x 18" (A1020)
For simple servo installation, there's nothing as quick as servo tape. With its shock absorbing qualities it can also reduce damage to radio equipment through vibration. Ultra-sticky, it's designed to stay put! | |
more | Perkins Velcro Receiver Retainer (5508000)
| |
more | Ripmax Self Adhesive Velcro Tape (F-MG090O)
| |
more | Radio Active Servo Arm (35mm Long) JR (PRCA230)
| |
more | Radio Active Servo Arm (35mm Long) Futaba (PRCA225)
| |
more | Radio Active Leadlock Pack Of 5 (RGA2040)
These lightweight extension lead locks give additional security when clipped over a servo and extension lead plug and socket. Almost essential for high vibration environments such as ducted fan powered models and helicopters. | |
more | Radio Active Wing Seating Tape 12mm (RAA1063)
Close any gaps between the wing and fuselage to form an almost air-tight seal. Also stops the fuselage chaffing on the wing and protects its finish. Available in a variety of widths and lengths to suit the model you're building. | |
more | Ripmax Wing Joining Kit (SP1140)
Supplied as a pack containing enough SP113 resin and hardener, plus a length of fibreglass bandage, to reinforce one wing centre section. No waste! | |
more | Slec White Rubber Bands 5" (10) (SL44B)
| |
more | Slec White Rubber Bands 8" (4) (SL44E)
| |
stock
info | Radio Active Wing Bolts (RCA221)
| |
more | Radio Active M4 Wing Bolt with Nut x2 (RAA1091)
| |
more | Radio Active Wing Fix Bolts & Brackets (Pk 2) (RAA1075)
| |
more | Perkins Balance Weights Self Adhesive 5g And 10g (5508490)
| |
more | Perkins 1/5 1/5 Scale British WW1 Pilot (5508289)
more.. | |
more | Perkins 1/9 Jet Pilot Figure Unpainted (5508330)
more.. | |
more | Perkins 1/10 Small Civilian Pilot (5508426)
more.. | |
more | Perkins Pilot British WWII 1/8 Scale (5508369)
more.. | |
more | Perkins 1/3 Pilot Civilian 1/3 Scale (5508265)
more.. | |
more | Perkins 1/8 Pilot Civilian 1/8 Scale (5508367)
more.. | |
more | Perkins 1/9 Pilot Female 1/9 Scale (5508323)
more.. | |
more | Perkins Aircraft Navigation Light Set (5507955)
| |
more | Ripmax Canopy Latch Sprung (RMX010)
This inconspicuous and lightweight, yet very durable canopy
latch system is a must for every building bench. Each pack
contains 2 sprung and 2 solid fixing points. Secure with glue.
| |
more | Perkins Z Bend Pliers (5537318)
more.. | |
RC Cars, Trucks, and Tanks
Search
Index
Checkout
Back