more | Ansmann Body Post Marker Set (201000035)
These body markers are a great new innovation. As not all chassis have the same mounting points, most bodyshells are supplied without the post holes cut. These natty little devices fit over the top of the body posts, so when you press down the uncut bodyshell over the chassis, the positions are marked ready for cutting - Simple & Brilliant!! | |
more | Ansmann Body Reamer (203000009)
This tapered reamer is a great tool for cutting holes for body posts into Lexan or Polycarbonate bodies. Ideally use the Ansmann Body Post Marker set to position the area to be cut, then gently twist out the body post holes with this handy tool. | |
more | Ansmann Lexan Curved Scissors (201000016)
These curved scissors are a must for cutting out bodyshells. The curved profile follows the wheel arch of you RC car body perfectly, leaving you without the hassle of tidying up after making a messy job. Great as a compliment to any of our unfinished bodyshells. | |
more | Ansmann 1/10 Ford Mustang Bodyshell 2005 White Blue 190mm (241000054)
Ansmann offer bodywork offers superb value for money. These bodyshells are supplied in flexible polycarbonate, pre-painted and pre-decaled in the factory. You're assured of a great finish with one of these bodies, no painting, no masking, just fit it! | |
more | Ansmann Ford GT Blue Painted Polycarbonate Bodyshell (241000003)
Ansmann offer bodywork offers superb value for money. These bodyshells are supplied in flexible polycarbonate, pre-painted and pre-decaled in the factory. You're assured of a great finish with one of these bodies, no painting, no masking, just fit it! This body will fit all most all tamiya or rc cars with the right bodyposts, Wheelbase 250mm | |
more | Ansmann Ford GT Red Painted Polycarbonate Bodyshell (241000001)
Ansmann offer bodywork offers superb value for money. These bodyshells are supplied in flexible polycarbonate, pre-painted and pre-decaled in the factory. You're assured of a great finish with one of these bodies, no painting, no masking, just fit it! This body will fit all most all tamiya or rc cars with the right bodyposts, Wheelbase 250mm | |
more | Ansmann Ford GT Yellow Painted Polycarbonate Bodyshell (241000002)
Ansmann offer bodywork offers superb value for money. These bodyshells are supplied in flexible polycarbonate, pre-painted and pre-decaled in the factory. You're assured of a great finish with one of these bodies, no painting, no masking, just fit it! This body will fit all most all tamiya or rc cars with the right bodyposts, Wheelbase 250mm | |
more | Ansmann 1/10 Body Extreme Series 9 200mm (241000028)
Ansmann offer bodywork offers superb value for money. These bodyshells are supplied in flexible polycarbonate, pre-painted and pre-decaled in the factory. You're assured of a great finish with one of these bodies, no painting, no masking, just fit it! This body will fit all most all tamiya or rc cars with the right bodyposts, Wheelbase 250mm | |
more | Tamiya 1/10 Ferrari F430 Bodyshell (Pre-Painted) (51202)
With the Tamiya name you just know it'll be quality, and with this pre-painted bodyshell that's exactly what you get. Supplied as a spare to the XB range of ready to run Tamiya cars these body shells are strictly limited. Get yours now before they're all gone. | |
more | Tamiya 1/10 Citroen Xsara WRC 2004 Lightweight Body (51083)
Replacement bodyshell for Tamiya cars Includes decal sheet and spoiler/wingmirror detailing kit Supplied clear for your own choice of colour. | |
more | Tamiya 1/10 Ferrari 360 Modena Body Set (50896)
Replacement bodyshell for Tamiya cars Includes decal sheet and spoiler/wingmirror detailing kit Supplied clear for your own choice of colour. | |
more | Tamiya 1/10 Mitsubishi Lancer EVO VII Bodyshell (50927)
Replacement bodyshell for Tamiya cars
Includes decal sheet and spoiler/wingmirror detailing kit
Supplied clear for your own choice of colour. | |
more | HPI 1/10 Subaru Monte Carlo Pre-Painted Body 190mm (7262)
HPI bodyshells are moulded from strong polycarbonate. This Pre-finished body features headlights, grille, tail lights, official logos, window frames, door handles and more... | |
more | HPI 1/10 Dodge Viper GTS-R Clear Bodyshell 200mm (7473)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possible | |
more | HPI 1/10 Ford Focus WRC Clear Bodyshell 200mm (7412)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possiblemore.. | |
more | HPI 1/10 Mazda RX-8 Speed A Spec Clear Bodyshell 200mm (7488)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possible | |
more | HPI 1/10 Peugeot 406 Coupe Clear Bodyshell 200mm (7426)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possible | |
stock
info | HPI 1/10 Chervolet Monte Carlo Clear Bodyshell 200mm (7430)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possible | |
more | HPI 1/10 Chevrolet Camaro SS Clear Bodyshell 200mm (7460)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possiblemore.. | |
more | HPI 1/10 Lancer Evo 6 WRC Body Clear Bodyshell 190mm (7348)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possiblemore.. | |
more | HPI 1/10 Subaru Impreza WRC 04 Clear Bodyshell (200mm) (17505)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possible | |
more | HPI 1/10 Lotus Elise 2000 Clear Bodyshell 190mm (7376)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possible | |
more | HPI 1/8 BMW V12 LMR Racer Bodyshell (280mm) (7512)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possible | |
more | HPI Dodge Stratus Aero 2 Clear Bodyshell 190mm (7384)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possible | |
more | HPI 1/10 Porsche Cayenne Turbo Clear Bodyshell (200mm) (17512)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possiblemore.. | |
more | HPI 1/10 Pagani Zonda Clear Bodyshell (200mm) (17523)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possible | |
more | Protoform 1/10 Alfa Romeo 200mm Clear Polycarbonate Bodyshell (PL1442)
Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only. | |
more | Protoform 1/10 Dodge Stratus 3.0 (190mm) Clear Polycarbonate Bodyshell. (PL1476)
More aggresive handling bodyshell for indoor racing. comes with decals,window masks and a wing.Body is supplied clear, picture is for illustration purposes only | |
more | Protoform 1/10 Dodge Stratus 2.0 (190mm) Clear Polycarbonate Bodyshell. (PL1449)
very popular neutral handling bodyshell. comes with decals,window masks and a wing.Body is supplied clear, picture is for illustration purposes only | |
more | Protoform 1/10 R9-R Touring Car Bodyshell (190mm Rubber Ver.) (pl1498)
The much anticipated PROTOform R9-R is the latest in 190mm touring sedan bodies. Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only.more.. | |
more | Protoform 1/10 Dodge Stratus 2.1 Body (200mm) (PL1450)
Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only. | |
more | Protoform 1/10 Mazda 6 (190mm) Clear Polycarbonate Bodyshell (PL1465)
PROTOform has a reputation for producing touring car race bodies that are on the leading edge in terms of design and aerodynamics. PROTOform's Mazda 6 is designed for carpet as well as asphalt racing and just might the next standard by which all other bodies are compared. The Mazda 6 comes with wing, wing mounting hardware and a decal sheet. As usual, protective film and window masks ease the painting process. Body is supplied clear, picture is for illustration purposes only | |
more | Protoform 1/10 Sophia Gt (200mm) Clear Polycarbonate Bodyshell (PL1502)
The all-new 'World GT' class was officially introduced to the American on-road racing scene at the 2008 International Indoor Championships in Las Vegas. All in attendance heralded it as a great new racing format, with Mark Smyka declared the first ever WGT winner. All the racers who participated enjoyed these new cars as well! There was a lot of grinning going on.
more.. | |
more | Protoform 1/10 Ltcr Rubber (190mm) Clear Polycarbonate Bodyshell (PL1505)
The much-anticipated PROTOform LTC-R is now available and ready to lower your lap times! This Global Body Spec ready race body is designed specifically for rubber tire racing whether it�s on a carpet or a paved surface racetrack. It was designed with slightly more steering ability than the all conquering PROTOform Mazda 6 and MazdaSpeed 6 body styles - yet less aggressive than the PROTOform R9-R body. To further aid balance and rear grip the wing mounting location that�s slightly more rearward. The LTC-R features two trim lines � one for IFMAR/EFRA/ROAR/JMCRA racing at the 115mm height as well as the BRCA�s 120mm height rule. The oversize rear wing helps performance on a poor-grip surface that�s commonly experienced in club racing but also incorporates trim lines for sanctioned style racing. The LTC-R is available in 2 different weights of genuine lexan and comes with protective film, decals and wing mounting hardware. Body is supplied clear, picture is for illustration purposes only | |
more | Protoform 1/12 Amr Light weight Bodyshell (brca legal) (PL1611)
The ever popular 1/12th On-Road class is definitely a favorite with R/C racers and enthusiasts the world over. It has continued to evolve and grow in recent years, much to the delight of many. PROTOform has a long history of designing winning bodies for the ultra quick and nimble 1/12th On-Road class � with numerous ROAR Nationals, US Indoor Champs, Snowbird Nationals as well as IFMAR WORLD�s titles on it�s resume. The all-new AMR-12 race body will prove to be a step forward, in appearance and speed.
more.. | |
more | Protoform 1/10 Mazda Speed 6 (190mm) Clear Polycarbonate Bodyshell. (PL1487)
Without a doubt, there's been one particular body style that has been used in winning more RC sedan races than any other racebody since its debut in Thailand exactly 3 years ago, where Barry Baker won the Reedy Race of Asia.
Since then Marc Rheinard won the 2004 IFMAR Worlds, Adrian Bertin won the IFMAR 200mm Gas Sedan Worlds, and this year Andy Moore bagged the 2006 IFMAR Worlds - all using the PROTOform Mazda 6. There's been no major rubber-tire sedan race in the world that the Mazda 6 has not been a part of the winning combination, whether it be a ROAR, EFRA, Orion, Reedy, IIC, Snowbird's, or DHI Cup event. Body is supplied clear, picture is for illustration purposes only more.. | |
stock
info | Trinity P-Machine TC Body 190mm (TRI39100)
Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only. | |
more | Team Associated 1/10 NTC3 RTR Stratus 200mm Blue Bodyshell (AS6146)
Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only. | |
more | Carson 1/10 Subaru WRC 2001 Decals (69179)
| |
more | Carson 1/10 Subaru WRC 2001 Bodyshell (13249)
Body shell is shown painted for illustration purposes only, body is supplied clear | |
more | Team Losi 1/10 Lexus IS300 Body (A8055)
Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only. | |
more | Xray 1/12 Xray mini touring stratus body (309729)
Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only. | |
more | Hot Works 1/10 Nissan Fairlady 350Z (Blue) 190mm (MS051001B2)
| |
more | Parma 1/12 Zytek 04s Bodyshell Lightweight (10210L)
Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only. | |
more | Thunder Tiger 1/10 Renault Formula One Body Shell For UNO 2WD Chassis (PD6716)
Replacement Renault F1 Body Shell for the Uno F1 Nitro Car more.. | |
more | Ansmann 1/8 Extreame Series 1 Buggy Painted Bodyshell (242000001)
Ansmann offer bodywork offers superb value for money. These bodyshells are supplied in flexible polycarbonate, pre-painted and pre-decaled in the factory. You're assured of a great finish with one of these bodies, no painting, no masking, just fit it! This body will fit many 1/8 scale buggys, such as the EB4. | |
more | Ansmann 1/8 Extreame Series 4 Buggy Painted Bodyshell (242000004)
Ansmann offer bodywork offers superb value for money. These bodyshells are supplied in flexible polycarbonate, pre-painted and pre-decaled in the factory. You're assured of a great finish with one of these bodies, no painting, no masking, just fit it! This body will fit many 1/8 scale buggys, such as the EB4. | |
more | HPI 1/10 Grave Robber Body & Decals (Savage) (7167)
Now available for the Savage Monster Truck is the haunting Grave Robber body. Our body designers outdid themselves with this one… a late 50's hearse that is a perfect fit on the Savage line of trucks. The body features a realistic 3D hood-mounted blower, included hood cover, recessed grill, classic 50's fins and two giant decal sheets with extra decals that allow you to go from a realistic hearse look to a skull-crazy Grave Digger with ghost flames. | |
more | HPI 1/10 Ford F150 Truck Clear Bodyshell (Savage/T-Maxx Clear) (7196)
The Ford F-Series truck has been the best-selling vehicle across the United States for over two decades, and has been the best-selling pick-up truck for nearly 30 years! Using their own 'Super Duty' styling, Ford designed the F-150 to look great and still be extra-tough. If you like all-American truck styling on your R/C truck, the Ford F-150 is the body for you! | |
more | HPI 1/10 Nitro GT1 Clear Bodyshell (Savage/T-Maxx Clear) (7176)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possible | |
more | HPI 1/10 Nitro Rush Clear Bodyshell (Nitro MT/Rush) (7175)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possible | |
more | HPI 1/10 Nitro MX1 Truck Clear Bodyshell (7161)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possible | |
more | HPI 1/10 Dodge Charger Clear Bodyshell (Savage/T-Maxx Clear) (7184)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possible | |
more | HPI 1/10 Cadillac Escalade Clear Bodyshell 200mm (7490)
Now available from HPI is a new body that recreates one of the most popular full-size sport utility vehicles, the Cadillac Escalade! The new Escalade body fits on monster trucks like the Savage and also on 200mm touring cars. Add our Super size wheels & tyres on 200mm cars to give it the popular 24" wheel look. The body comes with a large pre-cut flexible vinyl decal sheet that includes two grills (one with a billet aluminum look), official Cadillac Escalade logos, and realistic 3D light buckets. This will be a popular body for monster trucks and touring cars!
| |
more | HPI 1/10 Bounty Hunter 4X4 Clear Bodyshell (Savage/T-Maxx Clear) (7186)
Monster truck fans can now make an exact R/C replica of the popular Bounty Hunter 4x4. A force on the USHRA Monster Jam circuit, the Bounty Hunter (www.bountyhunter4x4.com) has won numerous events against the top monster truck teams. The R/C version from HPI Racing comes with the complete graphics package to make it look just like the real truck, and is officially licensed by the 2Xtreme Racing team.
| |
more | HPI 1/10 Chrysler PT Cruiser Clear Bodyshell 200mm (7462)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possible | |
more | HPI 1/10 Dodge Ram Truck Clear Bodyshell (Nitro MT/Rush) (7173)
HPI bodyshells are moulded from strong clear polycarbonate. The detailed vinyl decal sheet includes: photorealistic headlights, grille, tail lights, official logos, window frames, door handles and more... Overspray film and pre-cut vinyl window masks are included with each body to make spraying your shell as easy as possible | |
more | HPI 1/8 Nitro GT-1 Truck Painted Body. Red, Black, Grey. Savage 21/25. (7753)
HPI bodyshells are moulded from strong polycarbonate. This Pre-finished body features headlights, grille, tail lights, official logos, window frames, door handles and more... | |
more | Parma 1/10 Gravedigger 12 Bodyshell + Decals (10165)
The Gravedigger bodyshell accurately represents the real monster truck, often seen at car shows and rallies. This 1/12 version is suited to smaller monster trucks, although a T-Maxx/Savage version is available. Body is shown painted and decaled for illustration purposes only , the body is supplied clear | |
more | Ansmann 1/10 Body Shell Muffler Twin Pipe Chrome (201000115)
| |
more | Ansmann 1/10 Body Shell Wiper Set Chrome 2pcs (201000117)
| |
more | Ansmann 1/10 Body Shell Muffler Big Bore Detail Set Chrome (201000114)
| |
more | Ansmann 1/10 Body Shell External Mirrors Chrome (201000116)
| |
more | RPM Racing "Fatboy" Chrome Sedan Pipe (81213)
Initially, RPM designed our exhaust tips in chrome. Then we decided that gold would look just as awesome especially when we saw how different all of your paint schemes can be. These tips were designed to add Concours-winning looks to any electric R/C vehicle. These are NOT working exhaust tips. They are merely for appearance. The tip screws on to a 1/8 inch thick, mock, black, round muffler that has an offset tab for the entire system to be mounted to the body using double-sided foam tape or with a screw. | |
more | RPM Racing Slim Twinz Chrome Sedan Pipe (81223)
Initially, RPM designed our exhaust tips in chrome. Then we decided that gold would look just as awesome especially when we saw how different all of your paint schemes can be. These tips were designed to add Concours-winning looks to any electric R/C vehicle. These are NOT working exhaust tips. They are merely for appearance. The tip screws on to a 1/8 inch thick, mock, black, round muffler that has an offset tab for the entire system to be mounted to the body using double-sided foam tape or with a screw | |
more | Fastrax Universal LED Light Set (FAST198)
All in one, light unit with headlight, brake and indicators and two settings. Takes power from battery pack | |
more | RC Neon Head,Fog And Taillight Set (Blue) (RC104)
The RC Neon Light set gives you inteligent lighting solution for your RC Car. With headlights, foglights, and fully working brakelights, tjis set will make your car stand out from the crowd. Utilizing an on-board power source, this light set really is bling! | |
more | Ansmann LED Strip Red And Connectors (201000182)
| |
more | Ansmann LED Strip Orange And Connectors (201000211)
| |
more | Ansmann LED Strip Red And Connectors (201000212)
| |
stock
info | Mtroniks Full Neon Light Kit-Green (STRIP-FULLGR)
| |
more | Ansmann LED Multi Function Unit (201000180)
| |
RC Cars, Trucks, Tanks & Boats
Search
Index
Checkout
Back